RUSTA品質驗廠自我評估問卷調查:
Policy 政策
1. Do you have a written quality policy? 是否有質量方針。
2. Does your quality policy include a commitment to continouous improvements regarding customer satisfaction 質量方針是否包含對客戶滿意方面可持續改進方面的承諾。
Goals & Quality KPI′s 目標和質量關鍵績效指標
3. Which are the quality goals for your company? 公司質量目標是什么。
4. Do you regularly follow up and review all goals and sub-goals? 是否月度性跟蹤質量目標及分目標。.
5. Are you measuring Cost of Poor Quality (COPQ)? 是否測量不良質量成本。
6. Are you following quality performance and statistics for Incoming goods per sub supplier? 是否跟蹤進料商供貨質量表現及進行數據統計。
7. Do you measure internal rejects in production? 是否測量生產工序中的不合格。
8. Do you take actions to continouously reduce the reject levels and corrective actions are taken when levels increase? 是否采取措施以持續降低不合格以及當不合格抬升時采取糾正措施。
Quality tools 質量工具
9. Do you use any quality tools or teamwork to continuously improve quality? 是否采用質量工具或團隊合作以持續改進質量。
10. Is continouous work with Failure Mode and Effect Analysis (FMEA), capability studies of their processes and daily meetings in place to improve the quality? 是否應用失敗模式和影響分析, 過程能力建設和質量例會等方式來持續改進質量。
Rusta/customer requirements Rusta品質驗廠/客戶要求
11. How do you secure compliance with RUSTA/Customer demands?怎樣確保Rusta和或客戶的要求得到符合。
12. Is RSM printed, read and understood by all relevant people in the organization?Rusta供應商管理手冊是否打印出來,被組織內所有相關人員閱讀并理解。
13. Is relevant information from the technical documentation distributed to relevant people in the organisation. 從技術文檔中的相關信息是否分發到組織內相關員工。
14. Are Self Declarations (SD) and Test Reports (TR) available and valid (maximum 2 years old)? 是否有自我聲明和測試報告(最多兩年效期)。
15. Are customer claims and customer complaints handled in a structured way? 客戶要求和投訴是否得到有組織的處理。
Process control Rusta品質驗廠-過程控制
16. Do you have process control? 是否有過程控制。
17. Are clear and correct tolerances set for critical measurements in all relevant places in production? 生產中各工序是否清晰設定了關鍵測量值的上下閥值。
18. Is Statistical Process Control in place for any of the manufacturing processes? 各生產工序中是否運用了統計過程分析。
Non conforming goods 不合格品
19. Do you have a written routine for how to handle non conforming goods, defects? 是否建立了書面的不合格產品處置流程。
20. Are non conforming goods segregated and clearly marked? 不合格品是否隔離及清晰標記。
Facility requirements Rusta驗廠設施要求
21. Are the production facilities clean and well organized? 生產場所是否清整有序。
22. Are the light conditions in production sufficient? 生產區域光照是否充足。